New products

Maxxis welter weight 20” X 1.5 to 2.5 - 48mm Presta valve 

The Meybo Disc Brake Adapter is available in 2 sizes which only fit the Meybo 2020, 2021, 2022, 2023 Holeshot frames. The adapter is available as separate part and is not standard included with the frame.Available for Mini, Junior, Expert and Expert XL in...

DESCRIPTION Box Two™ Square Taper Chromoly Bottom Brackets are the best option for young BMX racers and other users of three-piece cranks in search of an affordable, high-performance square taper bottom bracket. Each bottom bracket is hand-assembled with a Chromoly spindle, sealed bearings, forged...

DESCRIPTION All Box handlebars are engineered and crafted using our Oversized Technology. Handlebars have a dual purpose as they contribute to both steering and pedaling stiffness. By strategically varying wall thicknesses and tube diameters we have moved material from 3 low stress areas to...

Ultra-lightweight Box One™ Carbon BMX Handlebars are made using advanced carbon fiber technology. Designed for maximum performance. Made for standard 22.2 bar bore stems. FEATURES • Carbon Fiber - For Extreme Weight Reduction• Carbon Fiber - More Aggressive Steering Response vs. Titanium SPECIFICATIONS Material:...

Box One 70mm Carbon Brake Pad Inserts were formulated with a special compound compatible with carbon fiber rims. This helps keep the heat down while still creating high-performance stopping power. Designed to fit standard BMX brake pads that accept replacement inserts! Sold as a...

DESCENT JACKET Looking for that piece of kit for all conditions? More specifically the downpours or the mud? The all new Descent jacket has been handcrafted for just that. It all starts with the fabric and a true 3-layer membrane with 10k/10k waterproofness and...

The SD Carbon V2 fork is a rigid and lightweight race fork made from UD carbon fibre with a 7000 series aluminum steerer tube.  It is approved by the members of the Dutch national team and many other elite riders. Weight: 645g  * Weight may vary by...

The Meybo Bicycles Holeshot BMX race frames are constructed out of 6061 T-6 aluminum tubing that is square tapered and multi-butted for the ultimate strength and rigidity while keep the frame light and aggressive. The Meybo Bicycle line of Holeshot frames are the official...

iefjijfjff

Two large main compartments for boots, helmet or clothing as well as a lateral zippered pocket with attachments for smaller equipment items Well padded, ergonomic shoulder straps and extra-wide hip wings for a comfortable fit Reinforced bottom section, so it stands securely Volume :...

General labour, repairs, wheel assembly, bike assembly etc..

The Meybo Clipper Disc complete bike is a light weight competitive race bike that is ready for competition straight out of the box. The bike features the Meybo Clipper aluminum frame in the exact geometry as the well proven Meybo Holeshot bikes and frames....

The Meybo Clipper Disc complete bike is a light weight competitive race bike that is ready for competition straight out of the box. The bike features the Meybo Clipper aluminum frame in the exact geometry as the well proven Meybo Holeshot bikes and frames....

The Meybo TLNT, also written as Meybo Talent, bike is designed as entry level BMX race bike with a perfect price to match. The Meybo TLNT is track ready and are great way to get into the sport.  

The revolutionary, World Cup wining Meybo HSX Carbon is the top dog in the Meybo lineup.  It boasts optimal power transmission and has an unsurpassed combination of stiffness and handling. The Meybo HSX Carbon is the ultimate tool to get the best out of...

The all new alloy HSX 2024 is here!  It now has the same features, looks and geometrie as the carbon version and therefore the same great ride characteristics.  Meybo HSX frame features include: •          6061 T-6 multiple butted hydroformed tubing;•          1.5 tapered headtube; (Pro 21 and...

Specifications:Contains:- 4 new left support plates- 4 new right support plates- 16 Torx 7mm screws- 4 springs- 4 rear plates- 4 screws for springs- 4 spring tension adjustment nuts- 4 adjustment plates     HT, the high-end pedal brand was created in 2005 to...

Drop-The-Hammer. The first few pedal strokes win the holeshot. The holeshot wins the race. Designed for the 2008 Beijing Games, the foldable DTH is super-light to accelerate like no other BMX tire, yet holds up to the abuse you dish out. The dual-compound tread...

Diamondized pattern for optimal traction Ultra thin profile (29.5mm OD) NEW smaller flange v2.1 Lock-On Grip System = 100% Slip Free performance Soft reinforced ends 110mm Full Length Grip

Diamondized pattern for optimal traction Ultra thin profile (29.5mm OD) NEW smaller flange v2.1 Lock-On Grip System = 100% Slip Free performance Soft reinforced ends 110mm Full Length Grip

Diamondized pattern for optimal traction Ultra thin profile (29.5mm OD) NEW smaller flange v2.1 Lock-On Grip System = 100% Slip Free performance Soft reinforced ends 110mm Full Length Grip

Diamondized pattern for optimal traction Ultra thin profile (29.5mm OD) NEW smaller flange v2.1 Lock-On Grip System = 100% Slip Free performance Soft reinforced ends 110mm Full Length Grip

ABOUT The Venatic Carbon Rims are constructed from the highest strength standard modulus fiber. They promote low rotational weight, low aerodynamic drag, and high acceleration with maximum rigidity. UD weave carbon.  24x1.75" - 507mm x 30mm dish x 30mm wide x 36 hole13.7oz front -...

Drawing on Troy Lee Designs years of Downhill and BMX racing experience at the very highest levels, the Youth Sprint Kit packs all the same cutting-edge materials and designs that our adult racers have worn to countless race wins. For 2019, the Youth Sprint...

Drawing on Troy Lee Designs years of Downhill and BMX racing experience at the very highest levels, the Youth Sprint Kit packs all the same cutting-edge materials and designs that our adult racers have worn to countless race wins. For 2019, the Youth Sprint...

Drawing on Troy Lee Designs years of Downhill and BMX racing experience at the very highest levels, the Youth Sprint Kit packs all the same cutting-edge materials and designs that our adult racers have worn to countless race wins. For 2019, the Youth Sprint...

Drawing on Troy Lee Designs years of Downhill and BMX racing experience at the very highest levels, the Youth Sprint Kit packs all the same cutting-edge materials and designs that our adult racers have worn to countless race wins. For 2019, the Youth Sprint...

Drawing on Troy Lee Designs years of Downhill and BMX racing experience at the very highest levels, the Youth Sprint Kit packs all the same cutting-edge materials and designs that our adult racers have worn to countless race wins. For 2019, the Youth Sprint...

The 64' Impala got its name from the flat sweep geometry of six degrees back and four degrees up. This bar is 13 butted and heat treated 4130 chromoly, the crossbar is 16mm and they're available in 6 sizes in black and chrome.  Weights...

The Sinz 110bcd sprocket is the perfect match for your Sinz Square Tapered crank setup. This sprocket is ready to take a young pocket rocket straight to the podium, not only in style, but for less than it will cost you to get Cracker...

Converts a 26.8mm diameter seatpost to a 27.2mm for most BMX High Quality Alloy Shim Black

Bottom Bracket adapter 30mm to 24mm The Dangerboy BB shim adapts 24mm Spindle Cranks to work on Pressfit 30 frames. 

Now in stock the new Dangerboy headset reducer will enable you to run any standard 1" headset on your 1 1/8" frame.Machined and anodized out of solid 6061-T6 aluminum stock and built to last a lifetime.

Dangerboy Youth Seatpost Extender with a 5 degree rear bend for additional comfort. Dangerboy seat clamp included. 26.8 insert in frame and 26.8 seatpost insert. Shim available 26.8 to 27.2  Max Weight: 100lbs

  Warm it up - Cool it down The Tangent No Wheelie bar is back, and with seat clamp as shown 7/6/22

Product Highlights: Two piece 13 Butted Construction Heat Treated Post Weld 16mm Crossbar Tangent Graphics FlatIron62 8.5” @ 29" Wide 6° Back 2° Up Weight: 8" - 26.1 oz  Description: After the T.I.D. proved to be one of the most popular bars on the...

23" steel barrel with ABS composite base Smart head fits Schrader / Presta 120 psi / 9 bar maximum pressure Ergonomic V-handle Integrated storage for ball and toy adapters

BMX tall seat post for warm up and post ride. 26.8 will fit Orcas and Dangerboy Extender without shim. CNC 6061 aluminum construction No Offset 400mm length Precise seat angle adjustment with 2 Cr-Mo bolts

The Box One Rims feature a double-walled, eyeleted, low profile designed optimized to be lightweight and durable! Offered in both brake and brake-less variants, allow for clean and sleek wheel builds that only have rim brake tracks where they need to be. FEATURES Low...

The Box One 20mm Adjustable Axle offers unparalleled versatility, having one size fitting all 20mm through hubs from 103 to 130mm, allowing it to fit seamlessly into your BMX racing setup. With its adjustable feature, you can fine-tune the axle to fit your frame...

Avian Alloy handlebars are made out of double-butted 6061 aluminum, 22.2mm They feature a tapered cross-bar, and are available in five sizes and four colors which are gloss black, red, blue, and polished. 3 degrees up-sweep, 6 degrees back-sweep.  3 Inch have no Cross...

ULTIMATE BMX RACING SHOES WITH PRO-GUIDED DESIGN ARE ENGINEERED TO DOMINATE. FEATURES Uncompromising Cross Country MTB and Cyclocross racing shoe with the lightest ever structure. Lightweight SHIMANO ULTREAD XC rubber outsole with highly technical tread pattern creates the ultimate racing grip. Rider-tunable talon-shaped metal...

TECNO-3 SYSTEM Fit along the entire length of the shoe. Adapting the upper to the shape of the foot for a customized fit. The famous reliable and replaceable closures are improved by all new proprietary sidi Wire material. The system is serviceable and replaceable...

Dangerboy chainring. 5mm thickness option.  CNC machined to be stiff and light. Two Anodized colors options; Silver or Stealth Black 7075-T6 Aluminum Chainring bolts + allen key included. Material: 7075-T6 Aluminum Process: CNC Machined Finish: Anodized with machine engraved accents  Compatibility: • BCD: 4 Bolt - 104mm...

Sprintblock™ is the only portable, cost effective training device engineered to focus on "BMX specific" explosive power and strength training. Key ingredients in developing balance and producing horsepower can be taught in the multilateral development years (13 and under) to produce immediate results to bridge the...

The Box One 1/8" to 1/5" Headset Crown Race converts 1.5" headsets to 1-1/8" fork race. With a split ring design, this headset crown race offers a hard anodize black finish for durability. 1.5" Lower Bearing to 1-1/8" Fork RaceSplit Ring Design7075-T6 AluminumHard Anodize Black...

The Box Three Disc Brake Rotor is a Stainless Steel, 6 bolt rotor designed for BMX Race. Utilizing a small size and rounded outside edges for safety is the optimal size for any BMX Race bike.   ISO 6 bolt brake/hub interfaceRounded outside edgesLightweight...

DB Platform Pedals - Expert Super light youth size pedals have you covered on the BMX and Pump-Track and on the trails. Pedal body is precision (CNC) machined from lightweight 7075-T6 aircraft aluminum, with anodized finish and engraved logos. High strength steel axel (4031 chromoly).  Constructed with high...

Dangerboy Industries in-house Precision Engineering has resulted in the lightest, strongest, and fastest BMX Carbon Fiber rim. Our carbon wheels offer an incredible weight to strength-performance ratio. Reducing rotational weight while maintaining better energy transfer, all with less lateral flex. Accelerate faster compared to...