Products

Replacement cap bolt for 20mm thru-bolts. Max Torque of 15Nm when installed. SKU: 041824 Bolt, 15mm x 1 for 20mm Thru-bolts used on… Image SKU Name 091453 BMX Thru-bolt Kit, 20mm

SKU: 100708 Axle, Front - 100-10mm Bolt  Image SKU Name 085980-PARK Onyx PARK 100/10mm SS bolts Bolt-on Front Hub 085980-PARK-Helix Onyx PARK 100/10mm SS bolts Bolt-on Helix Front Hub 093376-Helix Onyx BMX 100/10mm Bolt-on Helix Front Hub 093376 Onyx BMX 100/10mm Bolt-on Front Hub...

SKU: 084165 Bolt, SOC HD 10mm x 1.5pitch x 40mm, Titanium used on…  Image SKU Name 099083 Onyx BMX OHM CL HG-110/10mm Bolt-on Rear Hub 104391 Onyx BMX OHM HG Hook-110/10mm Bolt-on Rear Hub 098769 Onyx BMX OHM HG-110/10mm Bolt-on Rear Hub 083543 Onyx...

SKU: 084165 Bolt, SOC HD 8mm x 1.25pitch x 35mm, Titanium used on… Image SKU Name 099048-Helix Onyx BMX OHM 100/8mm Bolt-on Helix Front Hub 104390-Helix Onyx BMX OHM HOOK 100/8mm Bolt-on Helix Front Hub 102756 Onyx Vesper ROAD HG-11SPD 130/8 Bolt-on Rear Hub...

Specifically designed for Onyx BMX Ultra SS hubs Available in 14, 15, 16, 17, 18, 19 tooth count Stainless finish 

KU: 100384 Cone, Knurled - 10mm used on… Image SKU Name 083543 Onyx BMX ULTRA ISO HG-110/10mm Bolt-on Rear Hub 104574 Onyx FAT MFU ISO CAMPY-N3W 190/10 Bolt-on Rear Hub 104572 Onyx FAT MFU ISO HG-11SPD 190/10 Bolt-on Rear Hub 104575 Onyx FAT MFU...

SKU: 103255 Endcap Assembly, Knurled - Left, 15mm Thru - Stainless Steel used on… Image Sku Name 087523 Onyx BMX ULTRA SS OX-110/12mm Thru-bolt Rear Hub 085962 Onyx BMX ULTRA SS OX-110/15mm Thru-bolt Rear Hub 086325 Onyx BMX ULTRA SSD ISO OX-110/15mm Thru-bolt Rear...

SKU: 100397 Endcap, Knurled - Right, 15mm Thru used on… Image SKU Name 085962 Onyx BMX ULTRA SS OX-110/15mm Thru-bolt Rear Hub 086325 Onyx BMX ULTRA SSD ISO OX-110/15mm Thru-bolt Rear Hub

  Onyx Endcap, Knurled – Right, HG 12mm Thru

Grease, KLUBER ISOFLEX LDS 18 Special A – 2 gram syringe

  Machined from the same high strength aluminum alloy as our hubs, these headset spacers will match your anodized hub shells or widgets.This 3 piece kit includes 1x 10mm, 1x 5mm, and 1x 2.5mm spacers.   Specs Weight 1.6 oz / 45 g Dimensions...

Machined from the same high strength aluminum alloy as our hubs, these headset spacers will match your anodized hub shells or widgets.This 5 piece kit includes 1x 10mm, 2x 5mm, and 2x 2.5mm spacers. Specs Weight 2 oz / 57 g Dimensions - Approximate...

The Onyx BMX Ohm series is designed to be the lightest option for first time riders under 120 pounds. Delivers instant engagement, low drag, and a lower weight design. Available only in anodized black only with either a 24 spoke or 28 spoke configuration...

Retaining Ring, Internal 42mm dia – Stainless Steel

Onyx Ring, Locking – 1.37 x 24 thread per inch

SKU: 086887 Sleeve, Axle Adaptor - 15mm used on… Image SKU Name 085962 Onyx BMX ULTRA SS OX-110/15mm Thru-bolt Rear Hub 086325 Onyx BMX ULTRA SSD ISO OX-110/15mm Thru-bolt Rear Hub

  Onyx Spacer, COG, Ultra SS SKU: 085961

Replacement inner axle body for ONYX Ultra SS 10mm disc rear hub FEATURES :• Aluminum 6061-T6• Width: 110mm• Axle tightening by 10mm BTR screw• Sold individually COMPATIBILITY:ONYX Ultra SS ISO 10mm rear hub SKU: 098702 Axle, Rear - BMX Ultra SS ISO 110-10mm Bolt...

1-1/8"/1.5", 36°/45° ACB For tapered 50 mm/62 mm OD head tube For 1-1/8" to 1.5" tapered fork Upper: Forged alloy cup with ACB (blue seal) Lower: 1.5" CNC-machined alloy cup with ACB (black seal) Stack height: 16.9 mm + 2.9 mm = 19.8 mm...

1-1/8" 45/45 ACB upper - 42mm ID 1.5" 36/45 ACB lower - 52mm ID Compatible with carbon or alloy head tubes For 1-1/8" to 1.5" tapered steerers 16.3mm stack height 74.2g

The great looking custom Meybo OS20Superclass complete bike is a lightweight race bike that is ready for competition straight out of the box. With well chosen parts such as Tioga Powerblock tires, Dangerboy hubs and Eleven components this bike is attractive for every racer. The...

The great looking custom Meybo OS20 Holeshot complete bike is a lightweight race bike that is ready for competition straight out of the box. With well chosen parts such as Tioga Powerblock tires, Dangerboy hubs and Eleven components this bike is attractive for every racer....

Our first major success at Chromag was the design and production of forward, relevant handlebars and in 2005, we were arguably the most progressive handlebar producer with some of the widest, strongest bars on the market.  The OSX35 is built off the foundation of...

1/2" - 1 1/8" Upper with 1 1/2 Lower. 2 Fork Races Included for 1 1/8" or 1 1/2" Fork 1 1/8" - Standard 1 1/8th Upper and Lower Sealed ACB - CNC Alloy Top Cap. Compression nut included

Description Secure engagement, easy to use, and fast! The CP-1.2 quickly grips cogs from 9 to 24 teeth with no manual adjustments. A great shop tool, the CP-1.2 is 13.7" (35 cm) long and can be used with one hand to hold any 7-speed...

One end is a C-wrench for headset locknuts, the other with 3 notches handles BB lockrings

Professional PARK spoke wrenches. Precise, durable, lightweight and easy to use 0.127"

Strong and smooth plastic tire levers designed to make life easier. Smooth material won’t scratch your rims Works with just about any tire, including tubeless Spoke hook on the end for times when you use multiple levers Sold as a pack of 3 levers...

The BBT-9 is used to remove and install external bearing crankset bottom brackets Fits cups and lockrings with 16 external notches and an outside diameter of approximately 44mm

4mm, 5mm, and 6mm hex set Wrenches made from industrial tool steel, through hardened and tempered for long life Chamfered tips for a perfect fit

2mm, 2.5mm, and 3mm hex set Wrenches made from industrial tool steel, through hardened and tempered for long life Chamfered tips for a perfect fit

The AWS-7 combines 4mm and 5mm hexes with a T25 Torx®-style wrench. Great for derailleur pinch bolts, brake pads, disc brake rotor bolts, and more. Wrenches are made from industrial quality high torque steel.

Used for Syndyt Bottom Bracket Cups Designed for 12 spline 23.4 mm diameter tool fittings - the most common tool fitting found on 7-12 speed cassette lockrings, and can also be found on some disc brake lockrings and Rock Shox® suspension fork top caps....

Powerful 12'' adjustable wrench, the PAW-12 is forged from carbon steel and chrome plated with a vinyl dipped handle Jaws open to 36mm with a laser engraved measurement scale

Fully adjustable clamp fits 7/8" to 3" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts Narrow clamping jaws (2.7"/70 mm) fit into tight areas or on short seat posts Durable textured powder coat...

Engineer for fit, function and leverage, these L-shaped shop quality wrenches are a must have for every workshop High-torque, industrial steel hexes Straight hex shaft on the short side, ball end on the long side Precision chamfered tips for a clean tight fit Comfortable,...

A complete set of star-shaped (Torx® compatible) wrenches Feature our proprietary P-handles designed for comfort, control, and leverage Made from high-torque industrial steel and through hardened for long life Durable wall?/?pegboard mount tool holder allows easy access and organization

Built on a stout 35mm chassis and includes a custom-tuned Charger damper and specific Solo Air system designed for more bottom-out progression than you'll ever need, because your trails eventually require some landings. Proven Charger damper with specific Dirt Jumping/Slopestyle tune Specific Solo Air...

Properly-applied grease will protect and extend the life of a bicycle's components while improving performance. Park Tool's PolyLube 1000 polyurea lubricant was developed specifically for bicycle maintenance and repair, and can be used with any type of ball bearings, threads, or press fit applications...

Highly tenacious synthetic-base grease. Waterproof, inert (will not react in contact with other greases)

  Intended for young riders looking for excellent value for money, the POSITION ONE cartridge bottom bracket is fitted with sealed bearings for sealed and frictionless pedaling. It has a square drive axle of JIS standard which is suitable for cranks of the same...

Model number: BBO-21 Press Fit bottom bracket for BB86 standard for road bikes Chrome steel bearings Cup diameter of 41 mm General Bracket Shell typeiBB86 - Shimano press fit Road Bracket spindle diameter (mm)i24 Bearings materialCrMo Bracket Shell Diameter (mm)41 Bracket Shell width (mm)86,5mm Specifications...

Offering excellent value for money, POSITION ONE offers a headset designed and developed for 1-1/8" standard threadless steerer headtube on 1-1/8" steerer fork. It has sealed bearings as well as CNC machined Aluminum cups and compression star. FEATURES: SHIS: EC34/28.6 | EC34/30 Angular contact...

POSITION ONE offers a compression star steering lockout system for use on 1-1/8" or 1" Steer tube forks. FEATURES  Steer tube : 1" Steer tube : 1-1/8" Sold with top cap and BTR screw

Product code: 86-4001(B or S)   Description This is Praxis M30 BB for installing a Praxis M30 crank into a BB86 Road frames, a BB90 MTB frame or BB92 MTB frame. Unique design in which the bearing outer race is also the outer press...

  M30 BB for installing a Praxis M30 crank into a BB86 BMX|Road frame, a BB90 MTB/BMX frame or BB92 MTB/BMX frame. 86-4001W Compatible with Meybo HSX Expert, Exp XL, Pro 21 - 2024, 2025 M30 Box Two spindle 30/28 For Praxis M30 spindle based...

PRAXIS 68-4101R Compatible with Meybo Holeshot 2024 and Meybo HSX Alloy 2023 for cranks with 30mm spindle Praxis Works M30 Thru Bottom Brackets - 30mm drive bearing/30mm non-drive bearing bottom bracket- For use with Praxis Lyft cranks and is compatible with 30mm spindle SRAM,...

Praxis M30-THRU BB for installing 30mm cranks into BB86, BB90 or BB92 frames. 30mm DRIVE / 30mm Non-DRIVE Also good for other brand 30mm cranks like SRAM, RaceFace/Easton “Cinch” cranks, Rotor Rex/3D+ cranks, and CaneCreek eeWings.  See full spec and notes below. SKU 86-4201W  Compatible with Meybo...

SKU: 86-6101 (For Box two cranks) This is our M30-THRU BB for installing our Doon into PF 386EVO frames. 30mm DRIVE / 30mm Non-DRIVE Also good for other brand 30mm cranks like SRAM, RaceFace/Easton “Cinch” cranks, Rotor Rex/3D+ cranks, and CaneCreek eeWings. SPECIFICATIONS PRODUCT M30-THRU PF 386EVO...

SKU: 86-6001 PressFit M30 BB for 386EVO Road/Gravel frames. SPECIFICATIONS INTRUCTIONS ⚠️ VIEW MANUAL HERE PRODUCT M30-386EVO BB - For use with Press Fit 386EVO Road frames. See photos above! BUY THIS IF : You are installing a Praxis M30 alloy spindle crank into...